Analogous colour study, using 3 hues next to each other on the colour wheel: magenta, red and orange, along with white to make the tints plus some collaged bits of paper |
It's always fun to see how adding black to yellow produces olive green. Black is a very powerful pigment and just the tiniest bit makes a difference, which is why most hand-dyers never run out of their first purchase of black dye powder. When dyeing shades, only a few grains of black dye are needed. When dyeing tints, the quantity of dye is reduced.
Then we moved on to create secondary colours from primaries.
Usually, yellow + blue = green, yellow + red = orange, and blue + red = purple |
Actually, the result depends on exactly which red or blue you choose as your "primary". Ultramarine blue mixed with red will produce something quite different from cobalt or manganese blue mixed with the same red. I can achieve this effect with cloth by doing gradient dyeing: changing the proportions of dye colours in the dye bath.
And how do we get muddy earth tones? By mixing complementary colours, from opposite sides of the colour wheel. I especially like the ochres I can get by mixing yellow and violet. I can achieve this effect with cloth by "over-dyeing", or by gradient dyeing, as above.
Then Jane Davies suggested we make little compositions using various colour schemes. A monochromatic scheme relies on one colour straight from the tube along with black and white to create shades and tints.
Pure cadmium yellow light, along with its tints and shades. I used some collaged bits from old magazines too, for texture. |
An analogous scheme, like the one shown at the beginning of this post, uses two or three colours found side-by-side on the colour wheel. And finally, a complementary scheme uses two colours found opposite each other on the colour wheel. Below is my effort using the opposites of yellow and purple.
with a few bits of paper collaged into place. |
1 comment:
What fun! I love what you are doing.
Post a Comment